Hefty Responsibility Horizontal Lathe Equipment
Features:
one. These lathes are suitable for turning forged iron and metal workpiece, turning of nonferrous metallic areas of massive or medium measurements.
two. It can do external cylindrical surface area turning, interior gap and conclude face turning.
3. It can also turn a variety of internal and external metric, inch, module and diametrical pitch threads, the best slide can be employed independently for turning of limited taper.
4. These lathes are of substantial energy, large rigidity and wide rotating velocity variety, so it can be utilised for large velocity and robust power turning.
five. Bed with substantial rigidity
Casted in complete piece, box sort inner framework, of high rigidity, with hardened guideway, TSF coated carriage to reduce the probability of lower speed stick-slip.
six. Major spindle with higher rigidity and high accuracy
Spindle comes with bearing of famous brand name, spindle-box of heat-symmetrical construction to steer clear of spindle axis drifting, oil lubricating to reduce heat distortion.
Spindle arrives with three assist composition to protected precision and boost rigidity, all gears quenched and tooth-floor to safe precise transmission and low sound, so the spindle is of minimal temperature rise, minimized heat distortion, and lengthy-expression steady substantial precision.
Optional accessaries:
Huge middle rest Massive centering bracket Motor Driven Tailstock and Tailstock with totarg guill Chuck guard, device publish protect, cable carring chain.
Design | AL-1000B | AL-1250B | AL-1600B | ||
Capacities | Swing in excess of mattress | 1000mm | 1250mm | 1600mm | |
Swing above carriage | 615mm | 865mm | 1250mm | ||
Max. length of workpiece | 150030005000600080001000012000(mm) | ||||
Max. turning length | 13002800480058007800980011800(mm) | ||||
Span of guideway | 755mm | ||||
Spindle | Spindle nose | A215(8×M22)mm | |||
Spindle gap | morse 6(mm) | ||||
Taper hole of spindle | one:twenty/one hundred forty | ||||
Amount of CZPT turning speeds | 21 | ||||
Quantity of reverse turning speeds | twelve | ||||
Spindle pace | Ahead | three.15~315(r/min) | |||
Reverse | 3.5~291(r/min) | ||||
Feed movement | Variety of feeds per revolution(longitudinal/transverse) | fifty six/56 | |||
Feed per revolution | Longitudinal | .one~twelve(.004″~.473″)mm | |||
Transverse | .05~six(.002″~.236′)mm | ||||
Upper tool-post | .571~three(.001”~.118″)mm | ||||
Amount and range of metric thread | 441~120mm | ||||
Quantity and range of inch thread | 31 28~1/4″ | ||||
Variety and selection of module thread | 450.five~60mm | ||||
Quantity and range of diametrical pitch thread | 381/two~56DP | ||||
Resource post | Distance in between spindle centerline and instrument resting plane | 48mm | |||
Section of instrument shank | 45mm | ||||
Instrument put up swing variety | ±90° | ||||
Max. journey of carriage | 1402950495059507950995011950(mm) | ||||
Max. journey of leading slide | 300mm | ||||
Max. vacation of cross slide | 500(20″)mm | 580(22”)mm | 630(24″)mm | ||
Tool publish journey per change of the slide of top or cross slide | .05(.002″)mm | ||||
Speedy journey velocity | Longitudinal | 3740mm/min | |||
Transverse | 1870mm/min | ||||
Top slide | 935mm/min | ||||
Tailstock | Diameter of tailstock quill | one hundred sixty(6”)mm | |||
Vacation of tailstock quill | three hundred(12″)mm | ||||
Taper hole of tailstock quill | Morse six | ||||
Acceptance situations | GB/T4571-1997 Precision parallel lathe | ||||
JB/T2322-1993 Conditions parallel lathe | |||||
Others | Major motor electrical power | 22kw | |||
Max. weight ofworkpiece | 6000kg | ||||
Equipment general dimension | Duration | 4600610081009100111001310015100(mm) | |||
Peak | 1700mm | 1825mm | 2150mm | ||
Width | 2150mm | ||||
Equipment mass | AL-1000B | 9200107001210012800142001560017000(kg) | |||
AL-1250B | 15710118001480015500169001830019700(kg) | ||||
AL-1600B | 11400129001590016600180001940021000(kg) |