Attributes and Function:
Substantial velocity conveying paper area:
1.German technological innovation precision feeder head, cardboard and corrugated paper. Four suction and four supply, can change paper suction angle and top according to paper deformation to make certain high-speed and easy conveying of cardboard and corrugated paper.
2.Advanced double-side push-pull twin-purpose side gauge, adopting finish cam system, lower put on, higher stability, correct paper positioning, quick and convenient switching of press-pull operate.
three Fantastic adjustment of the paper feeding desk, which can be altered at any time according to the paper issue.
4.Electromechanical double detector.
five.Paper feed CZPT stopping, and outfitted with a pre-printing gadget.
6.Germany SAMPLA imported paper belt.
7.Xihu (West Lake) Dis. Feida head tremendous high anti-collision detection system gives sturdy and promise for the security of the paper feeding table and the feeder head.
eight.Exclusive paper-feeding system for distinct textured papers.
9.Super dress in-resistant paper feed wheel and imported paper feeding belt make the fish scale paper feeding a lot more accurate and quick.
ten. Dual-use paper desk, can be employed for guide paper loading, or can be straight used for forklift paper.
eleven.When there is a fault in the process of conveying paper, the Feida component is divided from the principal engine element by the pneumatic single-level clutch and stops running, the main device operates usually, the services existence of the complete machine is enhanced, and squander merchandise are decreased. This characteristic helps make proofing layouts less difficult.
Principal Section:
one.The strain-bearing component is high-strength ductile iron QT500-seven, which is solid by particular process, higher energy and by no means deformed.
two.Japan imported high-quality alloy metal crankshaft processed by particular approach.
3.Germany SEW manufactures tremendous put on-resistant worm gears and worms.
4.Specific strain regulation system for simple adjustment whilst the device is operating.
5.Four-claw connecting rod layout with tremendous weighty load (pive shaft Φ70*240), large die slicing pressure and little wear.
6.The variable frequency pace manage motor drives the imported worm equipment and worm to make the device operate efficiently and reduced sound.
seven.Unique aspect positioning layout permits each and every row of tooth to be positioned on a one positioning line.
eight.The gripper positioning compensation system ensures the balance of the die chopping precision.
9.Good-tunable entrance and rear positioning program for exact positioning and straightforward adjustment.
10.The scissor die-reducing of the relocating table helps make the die-slicing stress of the equipment uniform, and the stress is large. The German imported torque limit is in excess of-lower protector, which avoids the hurt induced by unexpected events to the equipment, ensures the protection of the machine and the security of the personnel.
11.Handy and quick knife template turning unit.
twelve.Effective oil lubrication method, major chain microcomputer managed automatic intermittent lubrication.
thirteen.Italy Columbo substantial-precision 240-degree intermittent system drags the five rows of rows of teeth to run effortlessly, with exact precision and lower noise.
14. Italy OMPI imported pneumatic clutch system.
- 15.Japan SMC high speed rotary joint.
- Germany IWIS manufacturer gripper chain, the relative energy is enhanced by about forty five%, lengthy provider daily life.
Supply Office:
one.Automated paper-producing system to guarantee that the paper pile is neat.
two.Main chain safety gadget.
3.Anti-backing device.
four.Precisely handle the automated lifting and receiving of the delivery pile by means of the photoelectric detection swap.
5.Receiving paper to aid the blowing unit to make certain that the paper is neatly acquired.
6.Choose-up brush deceleration device for fast and straightforward adjustment.
seven.The sampling gadget can check out the quality of the processed components at any time and minimize the scrap charge.
Stripping Section:
one.The triple-coupling squander stripping system is harmonious, precise and strong, and can effectively get rid of all varieties of particular-formed squander components.
two.CZPT-layer drawer type scrapping higher and decrease molds can be speedily loaded and unloaded, and the stripping resources can be adjusted.
three.Simple to adjust the center body stripping template.
4.Upper body adopts pneumatic management lifting device.
5.CZPT squander-cleaning needle and elastic ejector, mixed into a ideal action of “hurry-pull”.
6.Intermediate positioning plate framework matching the intermediate positioning framework of the die-reducing component, simplifying the plate shifting treatment, making certain accurate plate-shifting positioning and enhancing creation performance.
7.Clearing the squander corners can be done both by implies of cleansing up and down the scrap or by clearing the yin and yang template.
eight.The stripping frame is manufactured of aviation aluminum alloy, which is mild in weight, large in power and in no way deformed.
9.The squander frame guidebook rail adopts ZheJiang imported substantial-power linear information rail, and the operation is secure and precise.
ten.The upper and lower stripping bins can be trimmed horizontally, which is hassle-free for the edition.
CZPTal Management Division:
1.The device realizes male-equipment dialogue through the touch display, and the operator can simply remove various faults in the mechanical operation according to the prompt of the contact display liquid crystal screen window, and can go through a variety of complex supplies of the device. The whole machine is monitored and exhibited by PLC and contact monitor for the procedure and fault of the entire machine. All protecting doorways and windows have safety alarm technique to make sure individual protection. The major motor adopts German Siemens high horsepower minimal energy motor.
two.Main and auxiliary paper feeding and supply motor are ZheJiang ‘s Shan Condition geared motor.
three.Gasoline pump for ZheJiang CZPTg.
four.The gasoline pump is created by Sino-German joint undertaking ZheJiang Yunwang Co., Ltd.
five.Advanced PLC and human-machine interface management system to make sure protected and precise monitoring of all components of the device.
six.CZPTal components and electrical circuits undertake sophisticated CZPTpean and American national basic safety specifications (CE expectations).
seven.The main electrical factors are all internationally renowned brand name goods to guarantee the trustworthiness of control.
Major configuration:
NO. | Part Title | Model | Location of Origin |
one | Xihu (West Lake) Dis.n device interface | Delta(ten.four Inch-TFT) | ZheJiang |
two | Molded base plate | DAE XIHU (WEST LAKE) DIS. | Korea |
3 | Principal motor | TECO | Japan |
four | Pneumatic clutch | OMPI | Italy |
five | Primary gripper chain | IWIS | Germany |
6 | Air pump | Yongdun | China |
7 | Rotating joint | SMC | Japan |
eight | Principal solenoid valve | SMC | Japan |
9 | Intermittent divider | DEX | ZheJiang |
ten | Paper belt | SAMPIA | Germany |
eleven | Lubrication pump | WLP | ZheJiang |
12 | CZPT | NSK,KOYO,NTN | Japan |
13 | Circulating lubrication cooling system | TSWUKWAM | ZheJiang |
14 | Turbine shaft | SEW | Germany |
fifteen | Torque limiter | TONG SHIN | ZheJiang |
sixteen | Crankshaft substance | Nickel chromium molybdenum alloy metal | Japan |
seventeen | Crankshaft | ZheJiang | |
18 | Frequency converter | TOSHIBA | Japan |
19 | Photoelectric switch | OMRON | Japan |
twenty | Contactor | SCHNEIDER | France |
21 | CZPT horn | Light | Korea |
22 | Button | SCHNEIDER | France |
23 | Program controller | OMRON | Japan |
24 | Encoder | OMRON | Japan |
25 | Filter | CHELIC | ZheJiang |
26 | Proximity swap | OMRON | Japan |
27 | Relay | SCHNEIDER | France |
28 | Principal paper feed motor | CPG | ZheJiang |
29 | Fastener | FS | ZheJiang |
30 | CZPT Xihu (West Lake) Dis.s | HIWIN | ZheJiang |
CZPT Parameters:
Product Requirements |
EX-800TN |
Max. Sheet Feeding Measurement(mm) | 810×620 |
Min. Sheet Feeding Size(mm) | 400×360 |
Max.Die Reducing Measurement(mm) | 810×610 |
Variety of heating plates | ten |
Thickness of Sheet(mm) | Cardboard:.one-15 Corrugated:≤4 |
Max Foil Roll Diameter(mm) | Φ240 |
Max.Fitness of Warp(mm/) | forty |
Max.Die Reducing Pace(S/H) | 7000 |
Precision(mm) | ± .1 |
Max.Working Force (T) | 280 |
Complete Power(KW) | 36 |
Whole Bodyweight(T) | twelve |
Proportions dimension(mm) W×L×H | 5310×4370×2356 |