GP90-3 All CZPT Diamond Core Drilling Rig
Performance and Specifications
Rod, Hole and Depth (with wire line)
| Drilling depth(m) | Hole Dia.(mm) | Rod Dia.(mm) | Material of Rod |
| 380 | 95 | 89 | Steel |
| 500 | 75 | 71 | Steel |
| seven hundred | 59 | fifty five.5 | Steel |
Depth are based on vertical hole.
Working Parameters(Duplex pump structure)
Main shaft rotation speed(ratio2.two:1): ≥1530rpm/≥960rpm
Main shaft torque(ratio3.5:1): 400rpm, 3.5:1>900
Axle pushing force: >62KN
Axle pulling force: >83KN
CZPT system working pressure: 20Mpa
Max. Pressure: 25Mpa
Drilling angle: 0-360°
Surface obliquity: 30°-90°
Drive head stroke: 1600 mm
Motor power: 75kw
Motor rotation: 1480rpm
Main pump rated pressure: 31.5Mpa
Auxiliary pump rated pressure: 31.5Mpa
Total weight: 2000kg(main body: 550kg+ Power unit: 700kg+Operation panel:132kg)
Outer dimensions:
Main body: 2370×300×500mm
Power unit:1710×1100×1270mm
Operation panel: 550×450×1150mm
Main Body
The machine body is composed of the following parts:
one. Chuck and speed reducer assembly including:
l Speed reducer: ratio 2.two:1
l Chuck and guide sleeve
l CZPT motor
n Working pressure: 20Mpa
n Maximum pressure:25 Mpa
n Theoretical drainage: 80ml/r, the minimum drainage 35ml/r
two. Holder assembly
3. Bed body
Oil cylinder in bed body adopt GG012-80/40x800x1060
Chain adopt 1# and 1 1/four# two kinds of bush roller chain.
Power handcart
Power handcart is composed of the following parts:
1. Y series three-phase squirrel-cage asynchronism motor
Voltage: 380 V
Frequency: 50 Hz
Rotational frequency: 1480 r/min
Power: 75Kw
2. High pressure duplex pump
Main pump rated pressure: 31.5Mpa
Auxiliary pump rated pressure: 31.5 Mpa
three. Oil filter
Filtration accuracy: 10 µm
4. Cooler
Oil pressure: 1.6 Mpa(max)
Water pressure: 1 Mpa(max)
5. Relief valve
Rated flow: 401/min
Adjustment pressure scope: 16-32 MPa
six. CZPTal drive pump for hydraulic oil refill: used for adding hydraulic oil
7. Walking wheel
Outstanding features:
Unmatched high drill head and spindle speed, which allows high drilling speed
Full hydraulic driven and control system, including:
CZPT rod feeding, pushing and pulling system
CZPT rod rotation driving system
Superior quality key components made of aircraft grade materials, fabricated with professional aircraft industry machinery
Power supply can be made by electrical motor/generator assembly.
Drilling angle adjustable between 0°and 360°
Advanced winching system
Flexible rotation base frame. Can easily change the direction by rotating the base design.
Secondary hydraulic oil filter. to make the filtration for hydraulic oil more safe, we set up the secondary filter in the chuck which will shows as a red point.
Magnetic prevention for hydraulic oil. Even if we have the first stage filtration for hydraulic oil from the oil tank, but we also set up the strong magnetic on the tank to absorb any chips so as to avoid it goes to next step.
Oil temperature sensor. In order to keep the temperature of hydraulic oil at safe level, we configures with the temperature sensor in the flow to monitor and feedback during the work.
CZPTal work time meter. We configure with this electrical recorder so that there will be clear record and report to check how much work has been done.
4 shifts design. high and low shift by stepless shift change For hydraulic shift mode
Two shifts for mechanical shifts mode.
More advanced, more humanized, more optimized design for whole working system.
Main Components
Power unit
Machine body
Control panel
Rotation unit
Rod holder
Slurry Pump
Surface mast hydraulic type
More Features of GP90-3 hydraulic diamond drill rig:
Main Duplex hydraulic pump direct connection with power motor CZPT gear box between which enhanced the drive power and efficiency significantly.
High quality drive chain with heavy duty configured.
High quality Jaw made by ourselves.
High quality oil seals.
High quality shape-unchangeable imported spring.
High quality oil resistant, high temperature resistant and high pressure resistant rubber seal O ring..
High quality anti-loose gasket
Considerate move and deliver tools.
